The method of using tin suction device and the main classification of tin suction device

A solder absorber is a tool that is used when repairing electrical appliances to collect the solder melted when the electronic components of the pad are removed. There are two types: manual and electric. A tin absorber is required for maintenance and disassembly of parts. It is even more difficult to disassemble in large-scale integrated circuits. If the disassembly is not good, the printed circuit board may be easily damaged, causing a lot of losses. The general tin suction device is manual type, and most of them are plastic products, because the head is often exposed to high temperature, so it is usually made of high temperature resistant plastic. So do you know how to use the tin absorber?

　　 How to use the tin cleaner

Manual

There is a spring inside the manual solder extractor with a rubber handle. When using it, first press the slide bar at the end of the solder extractor until you hear a "click" sound, indicating that the solder extractor has been fixed. Then heat the contact with a soldering iron to melt the solder on the contact, and at the same time bring the tin absorber close to the contact. Press the button on the tin absorber to attract the solder. If not cleaned once, repeat the above steps.

electric

The appearance of the electric vacuum tin suction gun is a pistol structure, which is mainly composed of a vacuum pump, a heater, a tin suction head and a tin holding chamber. It is a new type of tin removal tool that integrates electric and electrothermal tin suction.

When using, first press down the piston of the tin absorber until it is stuck. Then use an electric soldering iron to heat the solder joint until the solder melts. While removing the electric soldering iron, quickly attach the solder sucker nozzle to the solder joint and press the solder sucker button. Can not be cleaned once, can be repeated many times.

　 The main classification of tin suction device

Common tin-sucking devices include tin-sucking balls, manual tin-sucking devices, electric tin-sucking devices, anti-static tin-sucking devices, electric tin-sucking guns, and dual-use soldering irons. Most of the tin suction devices are piston type. According to the material of the suction tube wall, they can be divided into plastic tin suction devices and aluminum alloy tin suction devices. The plastic tin suction device is light and handy, the workmanship is ordinary, the price is cheap, and the long plastic tin suction device has strong suction power. ; The aluminum alloy tin suction device has a beautiful appearance and good airtightness. It can be operated with one hand, which is more convenient. According to whether it can be electrically heated, it can be divided into ordinary tin suction device and electric heating tin suction device. When the ordinary tin suction device is used together with an electric soldering iron, the electric heating tin suction device can be directly desoldered, and some electric heating tin suction devices also come with a soldering iron head. It can be used as a soldering iron after being replaced.

The above is to introduce to my friends about the usage of tin absorber and its main classification. Tin-suckers are often used in repairing electrical appliances, so be sure to fully understand how to use them when using them, so as to avoid malfunctions or mistakes during operation. In general, everyone's electrical appliances need to be broken. It is better to find professional personnel to repair them, and don't operate them blindly.